The No. 4 1/2 has the heft to help finely smooth, even the most difficult grain. All Rider planes are good quality and suitable for home or professional, site or...
Axminster Rider No. 4 1/2 Smoothing Plane SKU: BRI-506561 | Axminster Rider No. 4 1/2 Smoothing Hand Plane The No. 4 1/2 has the heft to help finely smooth, even the most difficult...
Axminster Rider No. 4 Smoothing Hand Plane SKU: BRI-107333 | Axminster Rider No. 4 Smoothing Hand Plane The No.4 smoother is a good first plane for those new to woodworking. All...
Axminster Rider No. 5 1/2 Jack Plane SKU: BRI-107336 | Axminster Rider No. 5 1/2 Jack Hand Plane The No. 5 1/2, as the name suggests, is halfway between a No. 5 and a No. 6....
Axminster Rider No. 5 Jack Plane SKU: BRI-107335 | Axminster Rider No. 5 Jack Plane The No.5 is a good plane to put to rough sawn timber to begin sizing and smoothing, long enough to...
Axminster Rider No. 6 Fore Plane SKU: BRI-506563 | Axminster Rider No. 6 Fore Hand Plane The No.6 is a dual-purpose plane; used for quick stock removal similar to a Jack or for...
A No. 62 low angle jack plane, was first produced in the dim and distant past by Stanley, It was originally intended for use on end grain and stock removal....
Axminster Rider No. 7 Jointer Plane SKU: BRI-506564 | Axminster Rider No. 7 Jointer Hand Plane The No. 7, the longest of the Rider planes levels the bumps and hollows to leave...
Designed for the manufacture of traditional tail vices and of course many other workshop applications where extra strength is required. The screw thread runs in quality grey cast iron flanged...
These blades are compatible with the version 1 Luban Block and Low Angle Block planes. The high carbon steel blade measures 32mm wide and is 3mm thick. Fitting and minimal...
Clifton Cryogenic Bench Plane Blade 45 mm The Clifton Bench Plane cutting irons are made from 01 steel that is now cryogenically treated. This cutting iron has a hardness of...
Clifton Cryogenic Bench Plane Blade 50 mm The Clifton Bench Plane cutting irons are made from 01 steel that is now cryogenically treated. This cutting iron has a hardness of...
Clifton Cryogenic Bench Plane Blade 60 mm The Clifton Bench Plane cutting irons are made from 01 steel that is now cryogenically treated. This cutting iron has a hardness of...
Clifton Planes SKU: CFT412BP | Clifton No. 4 1/2 Wide Smoothing Plane The Clifton No. 4 1/2 is the heavyweight version of the most popular sized Smoother in the No....
Clifton Planes SKU: CFT4BP | Clifton No. 4 Smoothing Plane The No. 4 is the most popular size Smoother, with the Clifton No. 4 made slightly heavier with a Bedrock...
Clifton Planes SKU: CFT512BP | Clifton No. 5 1/2 Wide Jack Plane The Clifton No. 5 1/2 is the heavyweight version of the perennially popular sized No. 5 Jack Plane,...
Clifton Planes SKU: CFT5BP | Clifton No. 5 Jack Plane The Clifton No. 5 is the perennially popular sized No. 5 Jack Plane, the "Jack of all Trades" plane for...
Clifton Planes SKU: CFT6BP | Clifton No. 6 Fore Plane The Clifton No. 6 is sized midway between a Jack and a Jointer and is designed to further true a...
Clifton Planes SKU: CFT7BP | Clifton No. 7 Jointer Plane The Clifton No. 7 is the longest in the Clifton range and are designed to level the high spots and...
Clifton Planes SKU: CFT3BP | Clifton No. 3 Smoothing Plane The Clifton No. 3 is the smallest bench plane in the range, and is of the same exacting quality build...
Designed for smoothing varying-grain woods, this fixed-mouth smoother hand plane has its blade bedded at approximately 45°. The wedged HSS blade is 50 mm wide and 3 mm thick and...
These quality bench chisels feature CRV steel blades hardened to RC59-63 and natural finish European hornbeam handles. This set comes in a wooden presentation box with size 6mm, 10mm, 16mm...
This is a beautifully crafted set of bench chisels for general woodworking, featuring CRV steel blades hardened to RC59-63 and bubinga handles. This set comes in a wooden box with...